The clients request was to repair the floor and put a high quality gloss floor finish with a blue path guiding the cars where they needed to go.
Some of the floor area had a lot of cracking caused by the Reo being set too high in the finished slab, so it was agreed that we apply a 2mm trowel on coat to the bad area and patch the rest. Then Grind back and apply the grey, then final set out and apply the blue finished coats over that.
There was a large construction joint through the main floor of the second unit, this was re cut, cleaned out and a specialized joint sealant that colour could be added too, to blend the entire joint into the floor.
As the existing vinyl was used the request was that we supply a suitable cover strip at the joining of the resin and vinyl that would allow for vehicles to run over.
