
Bridge Jointing System
Recently a client had a bridge which was built in the 70’s with several large 90mm wide construction joints through it, underneath in recent years a shop had been built. The client approached Safeguard to resolve a leak in the joints, which had damaged the roof within the shop below and was still leaking.
Safeguard sourced and installed a bridge jointing system, that has aluminium plates that run the length of the joint on either side and a rubber compression strip through the centre, allowing large trucks and pedestrians cross over with damaging it, also stopping the leak.
Result – Client’s expectations were met and exceeded.
![]() Before |
![]() After |
Trackback from your site.